N5JLD dot NET

What I do in my Spare Time

User Tools

Site Tools

Trace:
3d_printing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
3d_printing [12/05/2025 13:30] – N5JLD3d_printing [02/04/2026 18:30] (current) – [BambuLab A1] Jon
Line 1: Line 1:
 ===== 3D Printing ===== ===== 3D Printing =====
 +02/03/2026
  
-** <font inherit/inherit;;inherit;;#95a5a6>Code:</font> **+**White PLA Filament:**
  
-<code> +I have always wondered why when I print in White, there are always little gaps near edges. At first I just thought that it happens with Black Filament too. I tested it and no it does not print exactly the same. I run Overture Filament only. Years ago I decided to stick with one type of Filament for PLA, PETG, a TPU. I run Calibration for each type material. From what I understand the additives in White that contains Titanium Dioxide. This makes if flow differently and may need to run a slightly higher Temperture.
-;===== date: 20231229 ===================== +
-G392 S0 ;turn off nozzle clog detect+
  
-M400 ; wait for buffer to clear +More to follow later. 
-G92 E0 ; zero the extruder +----
-G1 E-0.8 F1800 ; retract +
-G1 Z{max_layer_z + 0.5} F900 ; lower z a little +
-G1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos +
-G1 X-13.0 F3000 ; move to safe pos +
-{if !spiral_mode && print_sequence != "by object"} +
-M1002 judge_flag timelapse_record_flag +
-M622 J1 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M400 P100 +
-M971 S11 C11 O0 +
-M991 S0 P-1 ;end timelapse at safe pos +
-M623 +
-{endif}+
  
-M140 S0 ; turn off bed +==== BambuLab A1 ==== 
-M106 S0 ; turn off fan +02/04/2026
-M106 P2 S0 ; turn off remote part cooling fan +
-M106 P3 S0 ; turn off chamber cooling fan+
  
-;G1 X27 F15000 ; wipe+**Calibrating Filament for the A1**
  
-; pull back filament to AMS 
-M620 S255 
-G1 X267 F15000 
-T255 
-G1 X-28.5 F18000 
-G1 X-48.2 F3000 
-G1 X-28.5 F18000 
-G1 X-48.2 F3000 
-M621 S255 
  
-M104 S0 ; turn off hotend+----
  
-M400 ; wait all motion done 
-M17 S 
-M17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom 
-{if (max_layer_z + 100.0) <256} 
-    G1 Z{max_layer_z + 100.0} F600 
-    G1 Z{max_layer_z +98.0} 
-{else} 
-    G1 Z256 F600 
-    G1 Z256 
-{endif} 
-M400 P100 
-M17 R ; restore z current 
  
-G90 
-G1 X-48 Y180 F3600 
  
-M220 S100  ; Reset feedrate magnitude +==== Ender 5 Plus ====
-M201.2 K1.0 ; Reset acc magnitude +
-M73.2   R1.0 ;Reset left time magnitude +
-M1002 set_gcode_claim_speed_level : 0 +
- +
-;=====printer finish  sound========= +
-M17 +
-M400 S1 +
-M1006 S1 +
-M1006 A0 B20 L100 C37 D20 M40 E42 F20 N60 +
-M1006 A0 B10 L100 C44 D10 M60 E44 F10 N60 +
-M1006 A0 B10 L100 C46 D10 M80 E46 F10 N80 +
-M1006 A44 B20 L100 C39 D20 M60 E48 F20 N60 +
-M1006 A0 B10 L100 C44 D10 M60 E44 F10 N60 +
-M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 +
-M1006 A0 B10 L100 C39 D10 M60 E39 F10 N60 +
-M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 +
-M1006 A0 B10 L100 C44 D10 M60 E44 F10 N60 +
-M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 +
-M1006 A0 B10 L100 C39 D10 M60 E39 F10 N60 +
-M1006 A0 B10 L100 C0 D10 M60 E0 F10 N60 +
-M1006 A0 B10 L100 C48 D10 M60 E44 F10 N80 +
-M1006 A0 B10 L100 C0 D10 M60 E0 F10  N80 +
-M1006 A44 B20 L100 C49 D20 M80 E41 F20 N80 +
-M1006 A0 B20 L100 C0 D20 M60 E0 F20 N80 +
-M1006 A0 B20 L100 C37 D20 M30 E37 F20 N60 +
-M1006 W +
-;=====printer finish  sound========= +
- +
-;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power +
-M400 +
-M18 X Y Z +
- +
-</code>+
  
 ---- ----
  
-==== BambuLab A1 ==== 
  
----- +{{ :645749_363515_01_front_zoom.jpg?400 |}}
- +
-==== Ender 5 Plus ==== +
- +
-----+
  
 ==== Ender 3v2 ==== ==== Ender 3v2 ====
3d_printing.1764941404.txt.gz · Last modified: by N5JLD